← Guides and news

Satin vs Matte PPF: Which Finish Is Right for Your Car?

Spectre SatinBMW M2, film going on.Full video ↗
On camera
VOIR Spectre Satin PPF on a BMW M2

Spectre is one line in two finishes, Matte and Satin: 7.5 mil, self-healing, ceramic-infused, 10-year limited warranty. See Spectre Series – Matte & Satin PPF.

In this post

Satin and matte PPF both take the shine off your paint while protecting it. The difference is how much light they let back. Here is how to pick between them, and what stays the same either way.

For your car
Get it installed by a certified VOIR installer

Request a quote and we route it straight to a certified VOIR installer near you.

Get a quote or find an installer
The short answer

What is the difference between satin and matte PPF?

Matte PPF is a flat, non-reflective finish with no sheen. Satin PPF is a muted, low-sheen finish: the car still shows its lines, with the gloss dialed down. VOIR Spectre comes in both, Spectre Matte and Spectre Satin.

More answers

What stays the same?

Everything but the look. Spectre Matte and Spectre Satin are both 7.5 mil, with a ceramic-infused topcoat that self-heals light scratches, and both carry a 10-year limited warranty from the date of professional installation once it is registered and approved through the VOIR website.

Can you put satin or matte PPF on gloss paint?

Yes. Spectre goes over any paint color and turns a gloss finish matte or satin while keeping the original color. Because it is a film, it can be removed later to show the original gloss paint underneath. Matte vinyl changes the look but offers little impact protection and cannot self-heal; matte paint is permanent and costly to repair.

How do you care for satin and matte PPF?

Never wax, polish or use gloss-enhancing products, which leave shiny spots. Wait about a week after installation, then hand wash with soap and water and a matte-safe shampoo. The self-healing topcoat takes care of light swirls with heat.

Which one should you choose?

Pick the look you want: matte for a flat, stealth finish, satin for a softer sheen that keeps more of the car's lines. Both protect the same way. See both finishes on the Spectre matte and satin PPF page, then find an authorized VOIR installer near you.

For shops

Spectre comes in 60" x 50' rolls in Matte and Satin. Verified VOIR dealers order online at their own wholesale rate. Become a VOIR dealer.

Ask us about this film. Questions about Spectre? Tap "Ask the VOIR Team" on any page and Ashley will help.

Get dealer pricing Wholesale rate · No exclusivity

The VOIR films

More guides